create Flexibility to move jobs between machines
In a leading-edge approach to programming CNC machines, Solutionware's MazaCAM is one programming system for all your CNCs. You can convert your existing Mazatrol program from one generation to another whether old or new ― for example: take your existing T1 Mazatrol lathe program and convert to a SmoothX, or your M2 Mazatrol mill program and convert it to your SmoothG.
Solutionware's MazaCAM enhanced programming software streamlines programming and set-up by unifying all CNCs into a single system. This enables the programmer to create a program and test it, then output to whatever CNC machine is available -- instead of having to commit to one machine before programming is started. Further savings are recognized on repeat work: when the job comes back it can be easily placed on whatever CNC is available, not restricted to the one it was programmed for originally.
Recoup Programming Hours
Invested In Your Proven Programs
When you put a new CNC into your shop, one of the questions is “How long is it going to take to get up and running with this new machine?” With your earlier CNCs, you usually have a large library of proven programs made over years of effort. “The new machine will have more power, but how can we use those thousands of existing, proven programs?”
Move jobs from one machine to another
You can convert your existing Mazatrol program from one generation to another whether old or new ― for example: take your existing T1 Mazatrol program and convert it to your Smooth i-series Integrex. Or, take a Matrix program and convert it to a T2 machine. Reduce programming time, especially when dealing with old jobs that have to be run again. Instead of spending the time writing the program over and over for the new control, simply download it to MazaCAM, convert it to another control and send it back out. This helps in reducing errors as the operator or programmer does not have to enter the numbers on the machine.
Within a short time, I received the enhancement to our software. We were able to convert all of our programs in 2 days, saving us a considerable amount of programming time. It’s fast, easy and it works. Essentially, we went from programming at the machines, which would have taken us about three months, down to about three days of conversion time using MazaCAM.
Paul Herman, Rafter Equipment Corp.
Contact us to get a demonstration on how MazaCAM can help you increase productivity in your shop today
Contact Us